CNK Polymer

About Product

Jeetack 546 Tackifier is a mixture of Very High Weight Polyisobutylene in Synthetic Base oil.

Application

Jeetack 546 Tackifier is an Additive that can gives tack and/or stringiness to Lubricants. The product prevents dripping, spattering, splashing and wiping off. The Additive can be used in several Industrial Lubricants and Greases as well as Specialty Oils. Some of the applications are:

  • Slide-way lubricants
  • Bar and Chain Saw Oils
  • Wire-rope Lubricants
  • Circulating Oils
  • Rail Curve Greases
  • Textile Machinery Oils
  • Rust Preventives
  • Anti-mist Cutting oils
  • Greases
  • Rock Drill Oils
  • Cable Jelly
  • Open Gear Oils
Treat Rate

The treat rate for a typical formulation would be in the range of 0.5 to 2% by weight. As there is no standard test procedure for measuring tackiness it is best decided by the formulator.

Typical Specification

Appearance                            : Clear, Tacky, Viscous Liquid

Density at 15 °C                      : 0.83 to 0.89 kg/litre

Flash Point, COC, °C                : 150

Kinematic Viscosity at 100 °C  : 6200 –7800 cSt

Packing

Jeetack 521 Tackifier is available in 175 kg net weight mild steel barrels

Storage & Handling

Normal storage conditions as applicable to any petroleum additive is advisable for storing Jeetack 546 Tackifier. Maximum storage temperature should not exceed 50°C.

Blending

Jeetack 546 Tackifier can be blended using conventional blending equipment.

Hazard/Toxicity

The product is non-hazardous and non-toxic. Normal handing precautions as in the case of any petroleum additive is advisable.

Download PDF

Download Product PDF

    Product Enquiry

    The manufacturer’s responsibility and liability is limited to supplying product as per specification given in the product data sheet or any other specification agreed upon and assumes no responsibility for any loss or damage arising out of the use of the product supplied.

    Product Enquiry Form

    Place an enquiry to purchase the products.