CNK Polymer

Close this search box.

Jeevim 253018

About Product

Jeevim 253018 Viscosity Index Improver is a mixture of Olefin Copolymer and Base Oil.


Jeevim 253018 VI Improver is an Additive that can be used as Viscosity Improver Auto Engine Oil formulations.  The Additive is highly shear stable (SSI 24) and helps maintain viscosity and consistency of the lubricant in extreme temperatures.

Treat Rate

The treat rate for typical formulations would be in the range of 3 to 5% by weight.

Typical Specification

Appearance                            : Viscous Liquid

Density at 15 °C                      : 0.83 to 0.89 kg/litre

Flash Point, COC, °C                : 170 Minimum

Kinematic Viscosity at 100 °C  : 8000 – 12000 cSt


Jeevim 253018 VI Improver is available in 175 kg net weight new mild steel barrels

Storage & Handling

Normal storage conditions as applicable to any petroleum additive are advisable for storing Jeevim 253018 Viscosity Improver. Maximum storage temperature should not exceed 50°C. As the product is highly viscous, for transferring the product from barrels, it is recommended to heat it upto 70°C.


Jeevim 253018 VI Improver can be blended using conventional blending equipments.


The product is non hazardous and non toxic.  Normal handing precautions as in the case of any petroleum additive is advisable.

Download PDF

Download Product PDF

    Product Enquiry

    The manufacturer’s responsibility and liability is limited to supplying product as per specification given in the product data sheet or any other specification agreed upon and assumes no responsibility for any loss or damage arising out of the use of the product supplied.

    Product Enquiry Form

    Place an enquiry to purchase the products.